Supply List for Under-Bust Corset Patterns by Farthingales

These are supply lists for the under bust downloadable patterns found on Farthingales corset pattern page. Please check the supplies for the size you purchased. Please be aware that if you adjust the length of the corset patter these lengths may not be accurate. (you may want to print this list)

Under Bust Corset size 18-26

• 10" busk
• 24 cm spring steel bones for beside the busk (optional) 2 x 50-8206-24
• 9" spiral bones, 1/4" wide (front to side seam) 2 x 47-8000-09
• 9 1/2" spiral bones, 1/4" wide (middle of side front panel - optional) 2 X 47-8000-9.5
• 11" spiral bones, 1/4" wide (side seam) 2 x 47-8000-11
• 10" spiral bones, 1/4" wide (middle of side back panel - optional) 2 x 47-8000-10
• 10" spiral bones, 1/4" wide (side back to back seam) 47-8000-10
• 28 cm spring steel bones, 6mm wide (beside grommets) 2 x 50-8206-28
• 28 cm spring steel bones, 6mm wide (center back) 2 x 50-82306-28
• 1 meter of coutil
• 5  meters of bone casing tape, 1/2" wide
• 3 meters Petersham ribbon or Bias binding
• 5 meters Lacing
• Link to the pattern this supply list was developed for Under Bust Pattern size 18-26
• Don't want to use steel boning? Buy 10m of German Plastic boning 7mm wide and cut it the lengths that you need.

Under Bust Corset size 28-36

• 11" busk
• 26 cm spring steel bones, 6mm wide for beside the busk (optional) 2 x 50-8206-26
• 10" spiral bones, 1/4" wide (front to side front seam) 2 x 47-8000-10
• 10 1/2" spiral bones, 1/4" wide (middle of side front panel) 2 x 47-8000-10.5
• 12" spiral bones, 1/4" wide (side seam) 2 x 47-8000-12
• 11 1/2" spiral bones, 1/4" wide (middle of side back panel) 2 x 47-8000-11.5
• 11" spiral bones, 1/4" wide (side back to back seam) 2 x 47-8000-11
• 12" spiral bones, 1/4" wide (middle of back panel) 2 x 47-8000-12
• 30 cm spring steel bones, 6mm wide (beside the grommets) 2 x 50-8206-30
• 30 cm spring steel bones, 6mm wide (center back) 2 x 50-8206-30
• 1 meter of coutil
• 5 meters of bone casing tape, 1/2" wide
• 3 meters of Petersham ribbon or Bias binding
• 5 meters of Lacing
• Link to the pattern this supply list was developed for Under Bust Pattern size 28-36
• Don't want to use steel boning? Buy 10m of German Plastic boning 7mm wide and cut it to the lengths you need.

Under Bust Corset size 38-44

• 12" busk
• 29 cm spring steel bones, 6mm wide (go beside the busk) 2 x 50-8206-29
• 10 1/2" spiral bones, 1/4" wide (front to side front seam) 2 x 47-8000-10.5
• 11 1/2" spiral bones, 1/4" wide (middle of side front panel) 2 x 47-8000-11.5
• 12 1/2" spiral bones, 1/4" wide  (side seam) 2 x 47-8000-12.5
• 12" spiral bones, 1/4" wide (middle of side back panel) 2 x 47-8000-12
• 11 1/2" spiral bones, 1/4" wide (side back to back seam) 2 x 47-8000-11.5
• 12" spiral bones, 1/4" wide (middle of back panel) 2 x 47-8000-12
• 32 cm spring steel bones, 6mm wide (beside grommets) 2 x 50-8206-32
• 32 cm spring steel bones, 6mm wide (center back) 2 x 50-8206-32
• 1 meter of coutil
• 5 meters of bone casing tape, 1/2" wide
• 3 meters of Petersham ribbon or Bias tape
• 5 meters of lacing
• Link to the pattern this supply list was developed for Under Bust Pattern size 38-44
• Don't want to use steel boning? Buy German Plastic boning 11mm wide and cut it to the lengths you need.

NOTE: For size 38-44 you may want to order wider boning than what is suggested above. Consider 11mm wide Spiral Bones, a Wide Busk and 11mm Spring Steel bones. If you decide to use these wider bones - be sure to get the 3/4" bone casing tape.